Space
Our beloved classic Pro Series offers superior filtration and comfort for all-day protection. Available in three sizes, from S to L.
Happy Masks have the following features:
- 5 layers, including our ultra-thin 3-ply nanofiber membrane filter, which has been tested by Nelson Labs to provide over 98% filtration against viruses, bacteria, pollen, air pollution, smoke, and other pollutants.
- A unique “parrot beak” shape that leaves extra space in front of your nose and mouth so you can comfortably keep it on for hours at a time.
- A full-coverage, washable nanofiber membrane filter uniquely developed to maintain efficacy for at least 50 washes or 250 hours.
- A reinforced nose wire sewn into the top trim of the mask.
- Adjustable ear straps and nose wire to ensure a perfect fit for a variety of faces.
- All masks are washable by hand. Please watch our hand wash video tutorial here.
Some important notes:
- Disclaimer: Happy Masks are not intended for medical use and are not devices intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease and do not meet the definition of a medical device as set forth in section 201(h) of the FD&C Act. 99.9% viral and bacterial filtration achieved in laboratory testing. Actual viral and bacterial filtration levels may vary. Results are not guaranteed.
- Filter recommended for approximately 250 hours of wear based on product testing to date. Actual life of the mask may vary based on wear and tear.
Materials
The materials in all five layers of our masks are carefully selected
and tested for protection, safety, and comfort.
- The outer fabric layers of our masks are made of lightweight polyester.
- The two non-woven support layers are made of Polyethylene and Polypropylene. These are both FDA-approved thermoplastic polymer fabrics used in N95 and surgical masks.
- The inner nanofiber membrane is made of PTFE (Polytetrafluoroethylene), a safe and FDA-approved material.
Did you know? Our masks are never treated with harmful substances or chemicals such as flame retardants, water repellents, or antimicrobial agents.
Materials
The materials in all five layers of our masks are carefully selected
and tested for protection, safety, and comfort.
- The outer fabric layers of our masks are made of lightweight polyester.
- The two non-woven support layers are made of Polyethylene and Polypropylene. These are both FDA-approved thermoplastic polymer fabrics used in N95 and surgical masks.
- The inner nanofiber membrane is made of PTFE (Polytetrafluoroethylene), a safe and FDA-approved material.
Did you know? Our masks are never treated with harmful substances or chemicals such as flame retardants, water repellents, or antimicrobial agents.
How to Wash a Happy Mask
STEP 1
Place masks
in a bowl of
warm water
STEP 2
Add a few drops
of dish or
laundry soap.
STEP 3
Gently mix soap
with water using
a spoon or finger.
STEP 4
Allow to soak
for 10 minutes.
STEP 5
Gently rinse off
soap under
running water.
STEP 6
Allow to air-dry
on a towel or in a
hanging position.
Care Tips
(Pro Series Only)
- Pro Series masks must be hand-washed.
- To help masks dry quickly, gently pat each side with a paper towel.
- Daily washing is not necessary. We recommend washing every
3-4 wears unless the mask is visibly dirty or begins to smell. - To disinfect between washes, spray with 70% isopropyl alcohol
and allow to air-dry.
Care Tips
(Pro Series Only)
- Pro Series masks must be hand-washed.
- To help masks dry quickly, gently pat each side with a paper towel.
- Daily washing is not necessary. We recommend washing every 3-4 wears unless the mask is visibly dirty or begins to smell.
- To disinfect between washes, spray with 70% isopropyl alcohol and allow to air-dry.
How to Wash a Happy Mask
STEP 1
Place masks in a bowl
of warm water
STEP 2
Add a few drops of
dish or laundry soap.
STEP 3
Gently mix soap with
water using a spoon
or finger.
STEP 4
Allow to soak
for 10 minutes.
STEP 5
Gently rinse off
soap under
running water.
STEP 6
Allow to air-dry
on a towel or in a
hanging position.
PRO VS. ULTRA
What's the
difference?
Both offer 98% filtration efficacy, but have different design features to meet your unique needs.
Pro Series
Soft and Lightweight
Sewn into the trim for a higher seal. Recommended for glasses-wearers.
Maintains 95% filtration after
50 hand washes.
Small, Medium, Large
Our most lightweight mask, ideal for
those with sensory sensitivities.
Ultra Series
Sturdy and Structured
Sewn just below the trim
for extra durability.
Maintains 95% filtration after 50 hand
washes or 25 machine washes.
X-Small, Small, Medium, Large, X-Large
Additional structured support layer to
better withstand wear and tear.
Bestsellers
The reviews are in!
See what our customers have to say.
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.
- Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device