*Disclaimer: Happy Masks are not devices intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease and do not meet the definition of a medical device as set forth in section 201(h) of the FD&C Act.
- 99.9% viral and bacterial filtration efficiency (tested by Nelson Labs USA)
- 99.9% protection from pollen and dust mites (tested by Taiwan Textile Research Institute)
- Repeated wash testing shows filtration efficacy is maintained for up to 50 washes (O.S.H.Co., Ltd Respirator Test Center, Taiwan)*
5 Layers of Protection
No more muffled voices or stuffy breathing
Our unique 3D design leaves space between the mask inner layer, and your mouth and nostrils.
Easy and even air flow
Includes a built-in nanofiber membrane filter, which is one of the best for enabling air to flow while keeping out the bad stuff. Plus, no need to buy separate filters!
A Precise Fit
All masks include an adjustable nose wire and adjustable ear straps to ensure a perfect fit for a variety of face shapes.
Soft inner fabric that stays dry
A quick-dry inner layer means fabric feels soft and dry, even after hours of wear.
No need to buy separate filters
Each mask contains a sewn-in nanofiber membrane filter. Unlike other masks with filter inserts, our filter provides full, corner-to-corner coverage that spans the entire shape of the mask.
Over time, the filter will start to accumulate enough particles to inhibit breathing. When you start to notice air is not flowing as easily as it once was, it’s a sign that you should replace your mask.
On average, masks typically last approximately 250 hours, but this may vary slightly depending on individual environments.
*Repeated Wash Test conducted by the Taiwan Textile Institute.
What our customers say
See all our reviews here
"I love these masks! They are super lightweight and comfortable compared with cloth masks I purchased from two other sellers. My children - who are 6 and 4 - were able to wear them yesterday for a 3 hour outing - no complaints! The adjustable ear loops and nose bridge make it very comfortable, and, unlike the other masks I’ve tried, they stay on easily without constantly having to be adjusted."
“The masks are super comfortable and provide a great seal. Because of the extra inch in the front, I can breathe and talk so much better, but the protection is there because of the fit. They’re comfortable and super stylish. I’m looking forward to buying more. Best mask I’ve owned so far. ”
"It has been difficult to find a quality mask from a reliable vendor online. I placed a few orders on various websites and they never arrived. So I was thrilled to receive my Happy Mask order so quickly after ordering. They're a great value since they offer such a high filtration rate AND they're washable. The masks are also really nicely made and fit great. They come in a range of sizes and I love that I was able to order a mask for every member of my family from one place."
"I love having masks that are easy and well made. Some friends ordered these at the same time I did, and they all love them--including how well they fit their kids' faces. All of them ordered more immediately, just like I did."
“In my opinion, the most effective mask is the one that my kids and spouse will wear. They will actually keep the mask on during bike rides, walks, errands, so this is the best mask for us! The ear loops are adjustable and comfortable. The fit is much more comfortable because it is dove-tailed in the front rather than flattening the nose, allowing more space to breath.”
“I have purchased several other masks/styles so far and Happy Masks exceeded my expectations! It provides very good coverage, has adjustable ear pieces which is great, feels more breathable than other masks due to the spacing and looks great. Someone on the street complimented me on the style in the first five minutes I had it on!”
Frequently Asked Questions
No, all of our masks include a built-in nanofiber membrane filter, which means you don’t need to worry about buying filters separately . You simply need to follow these washing instructions described below in the FAQ to maintain the filter, which has been tested to maintain its efficacy for at least 50 washes (when washed and cared for according to instructions).
Please follow the instructions below, or watch our washing tutorial video.
In short, the answer is yes. Under a microscope, viruses, including the coronavirus, are surrounded by an outer layer of lipids or fat. Just as dish detergent dissolves grease, it also gets rid of the greasy liquid coating of the virus, thereby de-activating it. If you feel the masks need an extra level of disinfection, we also recommend spraying it with 70% isopropyl rubbing alcohol after each wash. Placing it under the sun also serves as a deodorizer after washing.
All of our masks are manufactured in Taiwan, a country where wearing masks has been commonplace for decades as a result of experiencing the SARS pandemic in
2003 and frequent poor air quality. Taiwan’s response to the coronavirus has been touted as one of the best globally, with an extremely low infection and death rate. A contributing factor to this is the widespread practice of wearing masks in Taiwan. Manufacturing from a mature mask market such as Taiwan has made it possible to access the most innovative fabrics and technologies to create one of the most high quality reusable masks available.
On average, masks typically last approximately 250 hours, but this may vary slightly depending on individual environments. Over time, the filter will start to accumulate enough particles to inhibit breathing. When you start to notice air is not flowing as easily as it once was, or the filter seems to be moving in and out more with each breath, it’s a sign that your filter is getting clogged and it’s time to replace your mask.
Due to the nature of these masks and our commitment to ensure all customers receive a new, unworn, hygienic mask, we can not accept returns. Please reach out if you have any specific questions around sizing at firstname.lastname@example.org.
The sizing guidance on our product pages are how most customers have successfully determined the correct size to purchase. We have also included the exact measurements of each mask below.
Because our masks are not disposable, we do not recommend they be used by medical professionals in a medical setting. For hygiene reasons, it’s best medical professionals use masks they can dispose of after each use.
For masks that are in stock, we ship using USPS 1st class mail within 3 days of receiving an order. For rush orders, we ship via UPS 2-day and ship within 1 day of receiving the order. If you need to upgrade to UPS Next Day delivery, please reach out to us and we can help.
On average, USPS 1st class orders arrive within 3-5 days after we ship. Occasionally shipments may get stalled, and take slightly longer than that.
For masks that are back-ordered, the product pages will indicate when we will be back in-stock.
Our nanofiber membrane filter consists of 3 layers, with the inner nanofiber membrane consisting of small, synthetic fibers – each measuring one thousand times thinner than a human hair. This inner layer is sandwiched in between 2 non-woven layers, which provide structure and support to the filter and also enable its washability.
The inner and outer layers of the mask consist of a quick-dry polyester, which ensures fabric remains soft and dry, even after hours of wear.
For the patterns under our limited edition series, we usually discontinue old patterns and add new ones every 2 months. If you see a design you like, be sure to get it while you can! If you have suggestions for new colors or designs, please feel free to reach out at email@example.com.
Foggy glasses are the result of air escaping through the top of your mask. All of our masks feature an adjustable nose wire which seals the mask around your nose and cheeks. When worn correctly, exhalation passes directly through the mask and not up into your glasses. If you experience fogging, try pressing the top of your mask along the nose wire and across the cheeks, and if possible, try resting your glasses on top of the mask.
Our mask is made up of 5 lightweight layers. The outer and inner layers are made of a moisture-resistant polyester, while the filter is made of 2 layers of non-woven material and a nano-microporous film embedded in between them.